Dynamic Pile Load Tester

To validate the the design safety factors, pile design & lengths,

Pile Load Testing is an important factor for the piling works that should be properly

planned and factored into the project schedule and project costs at an early stage. It

provides the quick and accurate monitoring of force and displacement during te test.

This test is performed to confirm the design load calculations and to provide guidelines

for setting up the limits of acceptance for routine tests. It also gives an idea of the

suitability of the piling system. Initial Test on piles are to be carried out at one or more

locations depending on the number of piles required. Load applied for the initial (cyclic)

load test is 2.5 times the safe carrying capacity of the pile. Geo Technical Engineering

provides pile load testing for any project by applying static and dynamic test methods as

follows: 

• Static pile load testing (axial and lateral)
• Dynamic compression load testing by Pile Driving Analyser (PDA)  
• Pile Integrity Testing (PIT)